• Zak@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    17 days ago

    What I want from a battery soldering iron is a field-replaceable 18650 in the handle, not Webserial.

    • The Pantser@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      edit-2
      17 days ago

      Build a 18650 battery bank and plug in a pinecil or ts100. A solder iron with a 18650 would be heavy and uncomfortable for soldering.

      • Zak@lemmy.world
        link
        fedilink
        English
        arrow-up
        0
        ·
        17 days ago

        I would accept a bit of an awkward balance for being self-contained.

        • Munkisquisher@lemmy.nz
          link
          fedilink
          English
          arrow-up
          1
          ·
          17 days ago

          You’d want more than one cell. You’d be pulling 23amps from a 4.2v 18650 to give the same 100w at 20v power as you get from a top usbpd power supply.

          There are 18650s that do 30 amps for short bursts, but it would get as hot as the iron and be empty in 5 min