“It was like stealing powder from a baby” - probably this guy
“It was like stealing powder from a baby” - probably this guy
As a sysadmin and self-hoster this decision will absolutely make me drop Apple 150%. A clean and well implemented pwa was a big reason I have stuck with my iPhone 12 despite buying a pixel 7. I know there are options on Android but they all have issues either in ux or in ui that makes it very obvious I’m using a pwa.
Pinephone pro had awesome cell coverage. Better than my pixel 4 xl even. Now battery life is a totally different story. I’d last I tried was pretty awful too as phosh wasn’t amazing and plasma mobile would kill itself often. It’s been at least a year since I last used any of it though since I left it 5 states away.
Pine64 has a Quartz64 based compute module that uses the same Pin layout as CM4. I have 2 of them but I was a bit too early on the project last time I tried it. There was no official distro or kernel support at the time but it seems like things have gotten better.
Tons of good responses here. I’m surprised that nobody has brought up Tailscale though. It’s def the easiest vpn solution I have found. It’s got some great documentation and how to projects to get a home lab running and it’s got its own domain system baked in most of it being zero configuration. You can access mullvad vpn exit nodes straight from it, and set up those domains with ssl super easy e.g.
sudo tailscale serve —https=443 localhost:8096
That single command would allow any other devices connected to your Tailscale account to reach your Jellyfin using the domain “{serverhostname}.[tail-scale].ts.net” complete with a private reverse proxy and ssl cert.
There are a few things to click around in tailscale on but it’s a extremely easy to use free application that has made my self hosted life significantly easier due to my system living behind multiple firewalls that I sadly have no control over.
I can only add 2 things that I know of here that could help.
#1.Try a linear advance tune. That alone should give you sharper corners and more consistent details at higher print speeds.
https://marlinfw.org/docs/features/lin_advance.html
#2.A direct extruder can help with getting very precise sharp corners but from what I understand it will hurt with accuracy on curves. Also there is the whole fact that there is a motor on top of the hot end so weight and whatnot will hurt speed.
Anyway just check out #1. It should help with your issue. If not that then a feed rate tune would solve any over extrusion problems.
I never got to try the m8 but the htc one m7 was my favorite phone of all time. Such a unique and simple all metal design. Incredible speakers for the time and most importantly it fit perfect in my hand. I really wish they was still around as a phone manufacturer.
Would have been nice if they actually shipped devices to people who paid.
If there is a way then I guarantee it will eventually come to everywhere else. One way or another.
No no no no. I love the pinebook pro. But please don’t suggest it to anyone as a newbie hardware choice trying to get anything done. There are so many little quirks on hardware this slow and moreso having to deal with arm repos and all of the incompatible software/workarounds.
A few examples.
If you want to watch YouTube you basically have one browser option. Chromium. Additionally if you want to watch any drm content then you need to install a docker container that runs chromium that has drm enabled.
App images and flatpak software repos are nowhere near complete which can be not great for someone who is just trying to get some work done. Really not great when some devs are exclusively distributing via flatpak.
No virtualization. It just doesn’t have the capability. Sure there are docker containers but that isn’t exactly virtualization.
I love my pinebook. It’s a great machine for just have a very cheap low spec thin client with a decent keyboard and screen but I would never ever recommend it to a newbie.
I get around it by using an alternative search engine such as searxng.
Yeah, that is true. I’m personally not too worried about it. I was just stating my experience. I’ve seen some m1 airs go for around 300 dollars on local marketplaces in working condition. I personally think they are a steal. That being said keeping your important data backed up at all times is a given. A dead ssd is a dead ssd whether it is soldered to the board or not.
Honestly I’m looking forward to the day it shows problems. I would love to pull a main board from a for parts fully loaded or at least close to it air (doubt there are many out there) and do a swap to see if it works.
Honestly 8GiB is not a problem at all on the m1. I personally use mine about as hard as I use my 2018 razer blade advanced with 64 gb of ram. The fast storage in the first Apple silicon laptops allow for swap so fast that it just doesn’t matter. (Swap being kind of like using your storage as ram for folks who don’t know) the only time I found myself wanting is when I was running any servers for hosting local games or for extra gpu capabilites while viewing large intricate sliced files in cura. I can’t speak much for m2 or m3 but m1 it was a solid option to go with the base considering you were getting the best speakers and some of the best build quality out of such a thin and battery efficient device.
Thank you for posting this. I gave up on the show a week ago around episode 600. Marineford legitimately felt like they spit in my face and told me my time was worthless with how many cuts of “he’s almost there”. The show looks like it gets interesting again afterwards but Marineford legit just sucked the will out of me to continue watching. I was thinking of looking up a fan edit to just get the cliff notes and this is perfect!
According to ordinary things it takes hours.
Check the screw that is imbedded in the brass gear. It holds it in place to the stepper motor it is attached to. If it is loose at all then it will produce similar results to a clog. Also be sure that the screw is aligned to the cutout on the stepper motor axel. That is what keeps it spinning. If it is tightened but not aligned then it will make that skipping sound.
If you don’t purchase from carriers then there are lots of options out there. Fair phone makes a pretty decent phone new phone, pixel is great after you degoogle it. Older one plus phones are generally a steal. If you wanna get really adventurous (test bleeding edge totally free software with no restrictions) there’s the pinephone. Just be warned that one is straight up unusable as a daily driver imo. There are tons of great options if you purchase through channels other than carriers. What just sucks is phones that you would typically buy that would be unlocked are no longer unlocked if your only choice is through a carrier. I even remember a while back some phones would lock their bootloader when you brought your unlocked phone to their network if they sold a equivalent version of the device. I haven’t seen that in nearly 10 years though and I think it had something to do with oversight on manufacturers behalf and poor choice of distribution of firmware.
Samsung and the carriers. The easiest way for most people to get a phone is on a carrier plan but surprise surprise. They OEM lock devices so that users can’t swap firmware or root. Doing so would allow them to go to another carrier. As if hanging a lease contract over your head wasn’t enough.
This reminds me so much bugdom.
The nvidia/vulkan open source driver is apparently pretty rad. I haven’t had a chance to test it myself yet since I am running a dual gpu setup that contains one gpu that isn’t supported. The original maintainer for nouveau is apparently also working at Nvidia and contributing to the project as an Nvidia employee now too soooo maybe they are turning over a new leaf?
He goes into detail in the video below. https://odysee.com/@BrodieRobertson:5/did-nvidia-just-officially-support:2