“Dodgy Firestick”

It’s a Dell Optiplex 7050

Try a live Proxmox USB, it’s what I did when my machine went unresponsive. Allowed me to look through the logs of the OS when it hadn’t booted to find out what went wrong.

For me it was that I had put my USB HDDs in via Fstab and one had died, which made Proxmox unbootable until I hashtagged the lines out in fstab.

Eh I did all this with a cheap thin client.

Proxmox as the frontend

OMV in a VM with usb passed through

Debian VM for Plex and Docker

Adguard and Nginx and Arr in Docker

Network sharing from the OMV VM

HDDs to USB.

I’ve solved this exact issue and numerous others with samba / CIFS recently. This is how I have my Proxmox on a mini pc with usb mounted HDDs at present:

1 VM Home Assistant OS, not relevant really

1 VM OMV Open Media Vault.

1 VM Debian with Docker installed.

So in my experience over the last few months you want your usb drive to have absolutely nothing to do with Proxmox. Nope.

I had 3 hooked in mounted in Proxmox and when one of them threw a fit Proxmox refused to load.

Better to have a NAS VM installed and have the drive(s, I have 3, 2x1tb and 1x750gb) passed straight through, whole usb, to the NAS VM.

This means if the drive fails Proxmox doesn’t break, and also in my experience with OMV, it’ll still run if a drive breaks

Then what I did was set up the shares and made them samba in OMV then set my other VM, the Debian one, with mount points in the Fstab.

The key for me in this endeavour was to make sure the Fstab entry made sure that the OS wouldn’t fail if it couldn’t find a drive, as happened in Proxmox, so I made sure “nofail” was somewhere in the Fstab config.

For Samba to work in Linux you need to install cifs-utils, then add a line in /etc/fstab. Mine goes:

//omv.local/sharename /mnt/filename cifs credentials=/etc/cifs-credentials,file_mode=0777,dir-mode=0777,auto,nofail,vers=3.0 0 0

You have to create the mount point mkdir /mnt/filename and give it permissions with chmod

You also need to made the cifs-credentials file in /etc/

It needs to contain:

username=yourusername password=yourpassword domain=WORKGROUP

Then what I do for Audiobookshelf and whatnot is mount the mount point as directories in Portainer under the volumes: - /mnt/Downloads:/Downloads

Then in the UI of the service I’m using in Docker I can use the Downloads folder and it’s the mount point.

This is what’s working well for me. If a drive fails I try and fix it in OMV instead of trying to plug a monitor into my mini pc to try and work out from the logs why Proxmox has failed…

Use this comment as a framework for your research and save yourself some heartache. You can mount the CIFS/Samba share to Proxmox and use that, so you can still use the drive in Proxmox for backups and such

I’ve just come back to this comment to get sabnzbd running, thanks again

My budget-friendly solution has been to replace my ISP provided router with a 10 year old Netgear router that handles all the protocols my ISP does off eBay for £25.

I have a 4 storey townhouse so having this on the ground floor is useless when you’re on the top floor.

So I have a power line system installed which I’ve hooked into the modem. I’ve got a wired router in the front room that has all the front room tech worked in.

On the top floor I have an even older Netgear router a friend gave me, with OpenWRT installed plugged into the power line and running as an access point.

In total this whole system has probably cost me £80 to fully install as I was given the older Netgear.

Works beautifully, cost very little, and I’ve got a Guest Mode ap that turns on when I turn guest mode in Home Assistant, a simple “Hey Google turn on Guest mode”

It was one of them 1 week ban and all API tokens revoked things. I just told him to get his hand in his pocket

I gave a mate my username/password and immediately got blocked on Debrid when he used it…

Over the last few months I’ve made a whole bunch of different combinations of VMs, LXC and Docker until now, where I have Home Assistant, a NAS and a Debian server which I deploy docker stacks into.

At one point I had about 15 different machines I could spin up, but now it’s just the 3. The great thing about Proxmox is you can just create and destroy to your hearts content

I went Proxmox when I was in your shoes a few months ago.

It installs like a Linux OS so you already know how to do that.

You get a webui to work from.

From there, YouTube is a massive help. Watch videos on “how to install WHATEVER on Proxmox” and just replace WHATEVER with whatever you want to prod until it works.

My first service was Home Assistant, which I already ran on a Pi. I had that fully migrated in a day giving me a spare Pi.

Next it was Portainer, and used that for Adguard and Uptime Kuma, and then I got fancy and threw secondary servers of those services on my pi and put that on the network as a fail over.

So yeah, just install it and try to do shit, YouTube is your friend.

Are there still people around that mock the Nemos?

I mean I used to because they were posers, but then it was 20 fucking years ago and now it isn’t, and I have a “Spooky till I die” badge on my jacket.

To some of us it wasn’t a faze, it was just a step on the ladder to becoming awesome. Many fall off the ladder, hell a lot of people don’t even climb it, but those of us that do will rock until we die.

Don’t mock the rock.

Korn are coming to my little town in the north of England this year. I’m gonna hit the pit like I’m not 40

Holy shit I totally thought I was talking out of my arse lol

So you’re trying to get 2 instances of qbt behind the same Gluetun vpn container?

I don’t use Qbt but I certainly have done in the past. Am I correct in remembering that in the gui you can change the port?

If so, maybe what you could do is set up your stack with 1 instance in, go into the GUI and change the port on the service to 8000 or 8081 or whatever.

Map that port in your Gluetun config and leave the default port open for QBT, and add a second instance to the stack with a different name and addresses for the config files.

Restart the stack and have 2 instances.

Yeah I’ve kinda found the sweet spot now to be fair, but I’m using an esp32 board and some dude’s yaml, so I’ve been groping in the dark a bit

I already have motion sensors everywhere but I also have cats. They make it seem like there’s people wandering around the house all the time.

I’ve placed a lot of them on top of door frames that seem to miss the cats, but in the front room there’s sofas for them to climb up on which means they still get picked up.

I have also since this post purchased MMwave sensors. But they’re worse for picking up the cats.

So what I’m trying to do is add more sensors so HA has a better picture of who is in the house, and when.

To give you an idea, yesterday I took my wife to a Dr appointment, my kids are at their grandparents, but when I was sat on the car waiting for Wifey I noticed my kitchen lights were on in the app.

The Drs turned into the hospital and I was out for a good 4 hours, but got home and added “Is anyone home?” to my lights automations.

The cats don’t need lights

Exactly, it’s when the magic happens that it matters. Otherwise it’s smears all around

No no, people don’t forget the egg, it’s just that the egg is just a bloody smear without the magic serum.

I read comments! I watch a lot of videos about self hosting services and the comments is where you find other people who have followed the video and struggled at some point. If you’re lucky it’s a common sticking point you’re stuck on and someone in the comments has a way of fixing it.