Hot Wheels has Marvel series of cars too and took picture of this “well known” one recently.
Hot Wheels has Marvel series of cars too and took picture of this “well known” one recently.
deleted by creator
I’d recommend using distro you know best and/or most prefer to work with. I use the flatpak install of Jellyfin Media Player but there are also deb files available.
I’m currently using minipc with Intel n5105 (or something similar) for 1080p HTPC. Debian 12 OS with auto-login & Jellyfin Media Player starting at login. I control it with pepper jobs RF remote but also have a logitech wireless keyboard+touchpad for it. Keyboard+touchpad come in handy when browsing media sites on firefox but some might restrict quality. Some of the newer minipc’s I tried required adding backports repo to install newer kernel for wifi to work. I had been playing with Debian a lot when I set up first one & been using clonezilla to image them so it’s stuck.
Ordered a gmtek n97 minipc to play with and should have it in about a week. Going to test it out with 4k but it’s not a deal breaker for me if it cannot handle that well enough.
Create a backup image from the working SD card. Write that backup image to a spare SD card and verify it works. Then try to do ‘apt update’ and see if anything breaks. If it breaks you got a spare SD card ready to go :)
I had issues with DNS checks and traced it to my pihole. I changed that container’s resolv.conf to use cloudflare DNS and it has been working fine since. It was with Caddy so needed to change over to use IPs.
Sometimes I’ll lower resolution or quality just so a game loads quicker.
Another thing to remember is the client needs to support decoding the video in hardware or have enough CPU to handle it in software. I have intel i7 (3rd gen) with no hardware HEVC/x265 support but it has enough CPU to power through.
Self-host your own ACME server. Then you can use certbot pointed there.
These instructions are old so not sure if newer/better ways, https://blog.sean-wright.com/self-host-acme-server/
Does TrueNAS have a web UI that works well on mobile browsers for file download and upload? If it does then could probably use for simple scenarios.
I’d rather not wear anything on my wrists but I like data so wear an Apple watch 7 to collect health data. I use Health Auto Export app on iOS to sync health data to homeassistant. I found straightforward guide to set it up but it is not perfect, need to open the app regularly for the data sync to happen. Battery life sucks, for my usage max it’ll last is a little over 2 days. Quick charging works well enough so usually only gotta charge for a few mins once a day.
For 3, if router supports it could also try doing static route via Tailscale joined machine that has IP forwarding enabled
If your router lets you try adding a static route for the tailscale IP/subnet to the laptop with IP forwarding enabled.
Yep, I only played through couple races & was a few beers in, it felt acceptable for me at the time. Not sure how it would be with the latest gen Elgato cards & they are pricey so best to buy from store with a good return policy.
I have never seen a capture device with USB interface have any kind of usable latency, you’ll want one with PCI Express interface.
Elgato makes a capture card with PCI Express interface, I had a friend who used one to play all of his consoles on big virtual screen in VR. I tried out Mario Kart 8 for the Switch and it played great.
My current workaround for that is adding whatever I want to shuffle into a playlist. I have one with some sci-fi shows in it that I regularly use. Smart collections is my most missed feature from Plex.
edit: nvm, doesn’t sound like it would help your use case, read through it too quick first time round
Was it the official container image or 3rd party? Whichever it was, they should get notified so that init script can get fixed to prevent similar happening to others.
The OS was also very limited with focus on Linux ports of games which there were not very many at the time. Proton wasn’t a thing yet. I bought two of them, one for myself and one for my brother. I tested it out & it was neat but wiped both to do clean installs of Windows 7 so could play the games we wanted.
Intel Quick Sync video saw a lot of improvements on 8th gen & since it’s all so old the pricing differences between 7th & 8th gen are going to be negligible.
Yep, 8th gen (Coffee Lake) saw a lot of improvements in Intel Quick Sync, https://en.wikipedia.org/wiki/Intel_Quick_Sync_Video#Hardware_decoding_and_encoding
Slicers for FDM are open source and lots of forks. The built-in printer profiles vary a lot but can be created from scratch. You can find lots online to use as examples too. I currently use Cura, Prusaslicer, and Orcaslicer.
I’m more interested in printing plastic than tuning/upgrading the printer itself so I recommend a printer with automatic z-offset and bed leveling. Basic maintenance tasks such as cleaning, oiling, and greasing will need to be done on occasion no matter the printer. Beyond that I’ve only done simple retraction tuning.
I started with Elegoo Neptune 3 Pro. Klipper firmware upgrade improved speeds a lot. It wasn’t bad for a budget printer but lack of automatic z-offset can be frustrating so I replaced & gave it away to friend. Replaced it with Creality K1 which was a lot easier to get started with thanks to automatic z-offset calibration. Output quality is good but to get better would require upgrades + tuning. Been saving up to replace with Bambu Lab P1S combo so I can also do multi-color printing.