I replaced the springs on my Ender 3 Pro with Bed Stiffeners when I added a CR Touch. There is no need to level the bed anymore
I’m guessing a lack of vision resulted in an improper implementation with too many issues they don’t want to spend on fixing
Maybe the subject can be uploaded to a Tesla Bot as a backup
After doing my research, I’m going to be using XigmaNAS as the OS for my NAS build
Going to need 32 GB of RAM or more plus a GPU with 48 GB of VRAM just to run Win12 w/ AI subsystem so you have enough headroom to run a program or two
There is no such thing as food safe plastic
Try looking for Livestreams on Peertube
Nope, look at it blown up Nozzel is way too high You can see the bed through the lines Plus you have a few broken lines, likely lifted as the extrusion is to far from the bed The lines need to be short and wide not tall and thin
Z-offset is too high Try babystepping it down till those issues go away
Sovol SV06 or the bigger Sovol SV06 Plus Well, within the budget
Why Are you deaf
The Presidental Oath does not say “to Support the Constitution”
Are you searching hashtags and following them
You’ll be limited to PLA and PETG for filaments
My first PETG print
Enders print just fine but tend to be a bit more maintenance-heavy
Double your budget at least or be willing to learn the ins and outs of how 3D printers work at a basic level Be sure to check out the Tomb of 3D Printed Horrors on YouTube if you are into minis
Or just turn off image uploads
There is no such thing as a Backup, only Redundant copies