Japan also has their own system.

Don’t bother, it seems the metric are allergic to fractions that aren’t irrational.

^/s

1/16? That doesn’t seem very metric. They should have made it a tenth like everything else metric. That would be an easy system.

^/s

They do tile, they just don’t share an aspect ratio. Two letter sheets make a tabloid or ledger sheet (depending on grain direction of the paper), and two tabloid sheets fit on a broadsheet, which generally comes in rolls so there’s a bit of trim because the size comes from actually physically dealing with paper, which is why they’re also the names of the newspapers that were printed on them. Like, it doesn’t go down from letter like ISO a sizes do, but it generally works well enough.

Good thing Americans don’t use metric, that sure would be an awkward size.

US printers also do this, just using larger ANSI sizes instead of larger A sizes. Or they just use rolls.

It’s a beautiful standard that works wonderfully until you have to deal with any actual measurements. 210 x 297 mm - so easy to remember and divide.

Warning: Papaton is borderline impossible when you combine Bluetooth headphone and controller lag.

Propaganda from who? Big newspaper? Big book publisher? Big stick and wheel?

I thought this was a Mystery Flesh Pit National Park post for a second.

I think you just invented Windows 13.

To be fair 10ths are a thing in surveying. And occasionally engineering I guess but I’ve never seen it.

I want a ruler in 3rds just to mess with people now though.

If I remember correctly, it’s not the freezing point. Fahrenheit used a brine that included ammonium chloride to set 0 on his scale since it was the closest thing he could make in his lab that was a consistent temperature. The other end was body temperature, which he set at 96 if I’m remembering right since it’s more easily divisible than 100. He was a little off on his body temperature measurements so it’s considered a little higher than that now.

Often they serve areas where there’s basically no cell coverage. That’s why we used them when we did after trying a number of antennas and boosters. We’ve had neighbors put up 12m towers in conjunction with the WISP to get service.

It is and it isn’t, those are pretty standard fixed wireless rates. It’s largely used in pretty rural areas where you wouldn’t be able to get fiber or cable or often even DSL. They compete against things like hughesnet that’s more expensive and has something like a 15gb data cap. Or starlink for $150 a month and $500 of equipment and the weight on your soul of giving Elon money.

They often run wireless backhauls for tens of miles across multiple towers so bandwidth is pretty limited and setup and maintenance is somewhat specialized. Like yeah if you can get cable or fiber do that it’s way better. But when there’s no other option is not that bad all things considered.

If the signal is decent I’d bet there’s a problem upstairs too.

Going through Airbnb support really isn’t worth it and will take forever. Just message the hosts directly. If you have an Airbnb account you can be added as a guest on the trip by her and message them yourself if she doesn’t want to deal with it.

Ok I have an amount of experience with basically everything going on here so here’s what you should do:

First, find the listing and see if they have WiFi listed as an amenity. If they do great, you can complain to Airbnb as a last resort. If they don’t you can’t, which honestly probably isn’t going to change much unless they are turds.

Second, do a few speed tests around the house, especially next to the other duplex unit. On the Airbnb app, send a screenshot of them and say something to the effect of “hey we noticed the Internet is slow, are you having issues too?”

Either they never checked if the downstairs WiFi and there’s no signal, or there’s a problem with the Internet and they need to call the company. Both are pretty viable. Does your phone say 75% signal or -75db? -75db is not great, but 75% should be ok. If you get faster speeds near the other unit it’s likely their WiFi.

The other option is they have issues too. Fixed wireless can run into issues when things change like radar frequencies. They can call the company and get it fixed pretty quick. Even if they aren’t paying for the faster speeds the ping shouldn’t be anywhere near 600ms. Like, I lived with wireless internet for a long while and it’s slow or shouldn’t be that painfully slow.

Don’t just suffer through, often people don’t mention this kind of stuff and if the hosts aren’t on top of their tech they don’t know it’s an issue. There was an issue with the Wi-Fi firmware on a unit I do work for and the guests only mentioned it at the end of their month long stay. They should be willing to work with you especially if they advertise wifi but honestly probably even if they don’t. Like, just don’t be an ass about it and they’ll probably be pretty accommodating.

Yeah newsprint would be a pain in an inkjet depending on exactly what it’s like. It might not even be much thinner, it’s often a little “fluffy” so it can be printed fast.

If you take it in somewhere and get it spiral / coil bound that’s probably your best bet if you don’t want to do a binder. You can do it yourself but you basically need a little desktop machine to do the punching which is annoying unless you’re doing it regularly.

Traditional hardcover probably won’t work for you. That involves printing a bunch of booklets called signatures then sewing them together and it’s a whole thing. Basically there’s a reason well made hardcover books are expensive.

You could do perfect or tape binding pretty easy though. Essentially you glue all the edges to a backing and then wrap a cover around it. It works ok for low usage, but if you want it to lay flat or hold up to abuse you’ll have problems. You can kind of mitigate that by using a gpod spine backing but it’s not a perfect solution. If the copy you have isn’t already laid out for printing it may be worth it to edit it a bit so the contents are farther from the spine if you do that, but it makes printing a bit more complicated.

So, I’ve never pirated a book but I do have some printing and binding knowledge, so some of this might be off base.

If the original book isn’t fully chungus it’s probably printed on a low weight newsprint, a low weight coated paper, or something weird like vellum or scritta. Problem is most of that is going to be specialty and only really available in rolls or large sheets through a distributor.

Most of the thinner stuff you’ll be able to find in sheets has become a thing with fountain pen lovers. Look for Tomoe River or Bank paper. They are in the 50gsm range and should be a bit thinner than normal 75ish gsm copy paper. It’s going to be way more expensive than normal printer paper but it should be thinner. The other issue is actually getting your printer to reliably print on thinner paper. Home printers, especially inkjets, really don’t deal with thin paper particularly well. Lasers usually do better since they tend to use a different paper pickup and path, but they can still have issues.

Your printer should have a thin paper setting to reduce the amount of ink that it uses so you don’t get as much bleed. The other thing you’ll have to look out for is that those papers will take longer to dry than normal paper, so if your printer has a drying time you’ll probably need to set it as high as it will go. You might even want to wait a day before flipping it over for the duplex print. Which you definitely should some that will literally halve the size of the book. It will probably be fine anyway since this is likely a multi day project just given how long it will take to spit 1000 pages out of an inkjet.

Unless you absolutely need to have the whole thing with you all the time, I would consider printing it in volumes. Even if you duplicate sections like an index or glossary or reference section or whatever, you’re still probably going to have a lot less trouble and maybe spend less.

Welp, 50/50 on this show going onward. The first two seasons were the ones I didn’t watch.