We are well beyond the point of a majority of common hardware having built-in kernel drivers and userland software for extra stuff like RGB control that the best advice is rather avoiding Linux, to instead avoid the trash hardware (NVidia for the time being, GoXLR, Broadcom, etc.). My GPU, audio hardware, network interfaces are both popular products and have worked out of the box for years now.
2-2-1 still insinuates having a remote backup. I don’t see how this particular threat destroys a 2-2-1 setup.
Tbf to cloud sync, nothing is stopping you from using your own backup/restore service with your drm-free titles compared to the other features that Galaxy offers.
GOG has DRM for many titles: see Galaxy. As I understand it, it isn’t as pervasive as Steam, but is necessary if you want multiplayer on many titles or care about extras like achievements.
The heated bed is coupled to a thermistor. I’d argue controlling the temperature in order to not accidentally overheat parts of the phone is a step above a hair dryer.
I have been utilizing BunkerWeb for some of my selfhost sites since it was bunkerized-nginx. It is indeed powerful and flexible, allowing multi-site proxying, hosting while allowing semi-flexible per-site security tweaks (some security options are forcibly global still, a limitation).
I use it on podman myself, and while it is generally great for having OWasp CRS, general traffic filtering targets and more built on top of nginx in a Docker container, the way Bunkerweb needs to be run hasn’t really remained stable between versions. Throughout several version upgrades, there have been be severe breaking changes that will require reading the setup documentation again to get the new version functional.
Could you elaborate on this? As someone who uses SystemD extensively on workstations and servers for spawning and managing both system-level and user-level services, I do find minimal issues overall with SystemD minus some certain functionalities such as socket spawning/respawning.
Of course some of default SystemD’s housekeeping services do suck and I replace them with others. I would like to see the ability to just remove those services outright from my systems as separate packages since they do remain useless, but it isn’t that big of an issue.
Before going any further to adjust your Z offset and other factors to tune for better bed adhesion, you should probably adjust your bed to actually be level as well as ensure (seeing that you only have one z lead screw?) that the X axis frame isn’t sagging on the side not containing your Z lead screw. Once you’ve got those factors sorted out, you should check your probe repeatability and then set your Z offset accordingly.
Bed adhesion even with proper, clean first layers can be a pain depending on the bed surface, material being printed, how clean the bed is of oils and other contaminants, how hot the material is being extruded, and how hot the bed is among other factors. While using a bed mesh will greatly help to account for off-zero unevenness in your bed surface, you really shouldn’t use it to compensate for uneven bed leveling (especially when it looks like you are nearing more than 0.5 mm in unevenness).
To diagnose other print issues, it will be helpful to see a picture showcasing the problems described in a failed print.
As a side note, it is somewhat difficult to read your Klipper config file without using view source as it is being markdown formatted. You can negate it by using three graves on the lines above and below it so that it is wrapped in a ‘code block’ and isn’t formatted.
```
Some code
eeeee
fffff
```
Turns into
Some code
eeeee
fffff
User-Centric Innovation: Unveiling the Industry-Leading Battery Life
We know how a smartwatch becomes integral to its wearer’s life, and battery life can’t be a concern. That’s why we went back to the drawing board, driven by community feedback, to ensure the OnePlus Watch 2 delivers an exceptional user experience. With up to 100-hour battery life in full Smart Mode, it sets a new industry standard, ensuring that your watch keeps pace with your life, uninterrupted.
Really impressive how OnePlus is touting a relatively mediocre 4-day (at best) battery life on a smartwatch as something exceptional or something that they (falsely) claim as industry-leading. Maybe it is good by typical WearOS device standards, but is by no means top of the line for the smartwatch industry.
I am not sure if jest, but you could always take a few seconds at protondb to see that yes, all of those games do in fact run on Linux. Forza in particular seems to have issues for some users, but everything else works with minimal hassle.
Not the same person, but I greatly enjoy my (now second) Pebble classic for several reasons, which I imagine some are shared between Starayo.
Unfortunately for me, fossil’s watches do not match up. Looking at the gen 6, still uses an ill-suited AMOLED display that is bound to have poor contrast in direct sunlight unless the brightness is cranked so far that it will blow through the battery. Even then, the average battery life on the gen 6 is atrocious compared to most Pebble models as many reports say it can make it through one day. I’m sure by now, WearOS devices have worked out some of the kinks to make them easier and faster to use, though I am not sold on needing a personal assistant in order to do basic tasks (as Fossil markets their gen 6 smartwatch; I do doubt that this is necessary for general function).
Also, this might be controversial, but I personally feel that a device that has Bluetooth and is intended to communicate with a device that is often within ten feet of it really doesn’t need to waste resources and probably become more of a privacy nightmare by including Wi-Fi, LTE, and other data communication methods (beside NFC). Furthermore, pretty much every WearOS device I have seen has had a struggle to keep battery life for more than a couple days, and everyone deems that devices that can should be praised for whatever reason. Seeing as my ancient smartwatch that does most of what these newer watches do yet can effortlessly hold a six day battery life at worst, I seriously question why newer watches that have so much compromise and are incredibly misguided as to what a complementary wearable should be are what are being developed. Not to mention that the Pebble classic on launch was $99 USD whereas one can easily find $400+ smartwatches that still have way too much compromise in comparison.
There are not many Android phones that actually let you flex the open source benefits of AOSP. Android as it is packaged on many devices is not open source, and nor are the devices willing to fully let you install what you want. Ironically some of the only choices you have with the highest degree of freedom are from google.
VideoLabs is made up of many of the same contributors of VideoLAN, including Jean-Baptiste Kempf themself. It is arguable that this is in fact Unity banning VideoLAN’s VLC bridges for media playback in Unity.
The headphones you have don’t have any actual surround sound capabilities. The only thing they do is have a software driver that maps a set of channels from 7.1 surround sound to the binaural sound mapping of the headphones.
The pipewire sound server can do the same thing as iCue with filter chains and specific plugins. See this post for some pointers and guidance if you wish to set it up for yourself.
Do note that unless you have content built with actual 5.1 or 7.1 surround sound, there won’t be much actual benefit to using virtual surround sound on headphones in the first place.