Given how common it is for people to use the ‘reset password’ link for this exact purpose, it does make it seem kinda redundant to even implement passwords on many services to begin with.

What CPU governor are you using? I saved about 40W idle powerdraw switching to powersave vs the default on a Ryzen 9 3900X.

I ran RAID-Z2 across 4x14TB and a (4+8)TB LVM LV for close to a year before finally swapping the (4+8)TB LV for a 5th 14TB drive for via zpool replace without issue. I did, however, make sure to use RAID-Z2 rather than Z1 to account for said shenanigans out of an abundance of caution and I would highly recommend doing the same. That is to say, the extra 2x2TB would be good additional parity, but I would only consider it as additional parity, not the only parity.

Based on fairly unscientific testing from before and after, it did not appear to meaningfully affect performance.

125W (Less than $15/month) or so for

• Ryzen 9 3900X
• 64GB RAM
• 2x4TB NVMe (ZFS Mirror)
• 5x14TB HDD (ZFS RAID-Z2)
• 2.5GBe Network Card
• 5-port 2.5GBe Network Switch
• 5-port 1GBe POE Network Switch w/ one Reolink Camera attached

I generally leave powerManagement.cpuFreqGovernor = "powersave" in my Nix config as well, which saves about 40W ($4/mo or so) for my typical load as best as I can tell, and I disable it if I’m doing bulk data processing on a time crunch.

Realistically, the target audience are organizations as nowadays most business laptops are being carried between docking stations with the occasional meeting or air travel in-between and 13" is an excellent size to meet those needs.

When hooked to a docking station, the screen size and keyboard is entirely irrelevant and modern laptop performance is…honestly crazy good.

When in a meeting, it’s probably being either used to take notes fullscreen or show a presentation, so pretty neutral.

Finally, when traveling, you can really can feel the difference between a 13" and a 15" when you’re running on too short of a layover between flights.

My partner and I use a git repository on our self-hosted gitea instance for household management.

Issue tracker and kanban boards for task management, wiki for documentation, and some infrastructure components are version controlled in the repo itself. You could almost certainly get away with just the issue tracker.

Home Assistant (also self-hosted) provides the ability to easily and automatically create issues based on schedules and sensor data, like creating a git issue when when weather conditions tomorrow may necessitate checking this afternoon that nothing gets left out in the rain.

Matrix (also self-hosted) lets Gitea and Home Assistant bully us into remembering to do things we might have forgotten. (Send a second notification if the washer finished 15 minutes ago, but the dryer never started)

It’s been fantastic being able to create git issues for honey-dos as well as having the automations for creating issues for recurring tasks. “Hey we need to take X to the vet for Y sometime next week” “Oh yeah, can you go ahead and put in a ticket?” And vice versa.

Oh nice a nicely-formatted list of reasons I don’t switch phones more frequently than once every 5 years: I loathe setting them up as specifically as I want them to behave

I’ve read many many discussions about why manufacturers would list such a pessimistic number on their datasheets over the years and haven’t really come any closer to understanding why it would be listed that way, when you can trivially prove how pessimistic it is by repeatedly running badblocks on a dozen of large (20TB+) enterprise drives that will nearly all dutifully accept hundreds of TBs written to and read from with no issues when the URE rate suggests that would result in a dozen UREs on average.

I conjecture, without any specific evidence, that it might be an accurate value with respect to some inherent physical property of the platters themselves that manufactures can and do measure that hasn’t improved considerably, but has long been abstracted away by increaed redundancy and error correction at the sector level that result in much more reliable effective performance, but the raw quantity is still used for some internal historical/comparative reason rather than being replaced by the effective value that matters more directly to users.

If the actual error rate were anywhere near that high, modern enterprise hard drives wouldn’t be usable as a storage medium at all.

A 65% filled array of 10x20TB drives would average at least 1 bit failure on every single scrub (which is full read of all data present in the array), but that doesn’t actually happen with any real degree of regularity.

I think it’s worth pointing out that this article is 11 years old, so that 1TB rule-of-thumb probably probably needs to be adjusted for modern disks.

If you have 2 full backups (18TB drives being more than sufficient) of the array, especially if one of those is offsite, then I’d say you’re really not at a high enough risk of losing data during a rebuild to justify proactively rebuilding the array until you have at least 2 or more disks to add.

And if they somehow do, rest assured that red states will use it as an opportunity to disarm LGBT folk for being ‘violently mentally ill’ before the ink is dry on the decision.

Still a few Ubuntu Server stragglers here and there, but it works quite well as long as you keep your base config fairly lean and push the complexity into the containers.

Documentation tends to be either good or nonexistent depending on what you’re doing, so for anything beyond standard configuration but it can usually be pieced together from ArchWiki and the systemd docs.

All in all, powerful and repeatable (and a lot less tedious than Ansible, etc), but perhaps not super beginner-friendly once you start getting into the weeds. Ubuntu Server is just better documented and supported if you need something super quick and easy.

NextCloud main use is file synchronization

Is it? Interesting. I don’t think I’ve ever even considered using it for that purpose.

I mostly use it as an easily web-accessible interface for a variety of unified productivity and organization software (file upload/download, office suite, notes, calendar, etc), with easy ability to do stuff like create a password-protected shared folders of pictures/documents I can easily share with friends and family who don’t have accounts so they can upload/download/organize/edit files with me and each other from a browser without having to install additional software on client devices.

Which I’m not sure I get the popular mentioning of since it seems to serve a very different purpose than NextCloud does, like not even similar niches.

Nothing against it, of course, it just doesn’t feel like an ‘alternative’ to NC.

I would strongly suggest not using 900GB 10kRPM drives (and especially not 10 of them) in [current year] when brand-new 8TB hard drives cost $120, and 14+TB recertified drives aren’t much more than that. The power costs of 7 more drives than you need for the capacity definitely add up over several years of runtime.

Washing machine is a threshold sensor in Home Assistant on the power draw entity on a sonoff s31 smart outlet flashed w/ ESPHome.

Dryer is another threshold sensor on a current clamp connected to an ESP32 running ESPHome.

Still holding onto my Samsung Galaxy Note9

It has an excellent built-in stylus with a headphone jack and expandable storage to boot. Nothing that’s come out since feels like an upgrade, only various sidegrades.

We’ve both got a software dev background, so it wasn’t a particularly difficult solution to sell, as soon as we came up with it it was very much a “oh duh, why didn’t one of us think of that way earlier”

https://lemmy.world/post/10802805

My partner and I use a git repository on our self-hosted gitea instance for household management.

Issue tracker and kanban boards for task management, wiki for documentation, and some infrastructure components are version controlled in the repo itself.

Home Assistant (also self-hosted) provides the ability to easily and automatically create issues based on schedules and sensor data, like creating a git issue when when weather conditions tomorrow may necessitate checking this afternoon that nothing gets left out in the rain.

Matrix (also self-hosted) lets Gitea and Home Assistant bully us into remembering to do things we might have forgotten. (Send a second notification if the washer finished 15 minutes ago, but the dryer never started)

It’s been fantsstic being able to create git issues for honey-dos as well as having the automations for creating issues for recurring tasks. “Hey we need to take X to the vet for Y sometime next week” “Oh yeah, can you go ahead and put in a ticket?” And vice versa.