“almost all of the most technical employees in framework are using either ubuntu, fedora or nixos. I’m mostly on Windows because we need actually people that are using Windows because our employee base in framework is all Linux users”

• Nirav Patel

https://m.youtube.com/watch?v=EIEc43CxIvY

That is not the case for every country though. In France and Germany for example almost 3/4 of google requests are via IPv6.

Well you must have either set up a port redirect (ipv4) or opened the port for external traffic (ipv6) yourself. It is not reachable by default as home routers put a NAT between the internet and your devices, or in the case of ipv6 they block any requests. So (unless you have a very exotic and unsafe router) just uhhh don’t 😅 To serve websites it is enough to open 443 for https, and possibly 80 for http if you want to serve an automatic redirect to https.

That’s odd, I upgraded my ender 3 with bed leveling and removed the knobs to mount it fixed, because the damn knobs keep moving and then you have to redo the bed calibration. To be honest I can imagine one reason might be that a loosely mounted bed gives you more fault tolerance against the nozzle being too low. I put my bed on two parallel linear rollers for more rigidity, and combined with dual z screws the nozzle has no chance anymore to produce any sort of first layer when it is slightly too low. That made me realize just how much the stock ender 3 is flopping around, but also how this can give you mostly okayish results most of the time without having to deal with a ton of small tolerances.

A colleague of mine had a (non externally reachable) raspberry pi with default credentials being hijacked for a botnet by a infected windows computer in the home network. I guess you’ll always have people come over with their devices you do not know the security condition of. So I’ve started to consider the home network insecure too, and one of the things I want to set up is an internal ssh honeypot with notifications, so that I get informed about devices trying to hijack others. So for this purpose that tool seems a possibilty, hopefully it is possible to set up some monitoring and notification via uptime kuma.

Well it is compiled to byte code in a first step, and this byte code then gets processed by the interpreter. Now Java does the exact same thing: gets compiled to byte code which then gets executed by the jvm (java virtual machine), which is essentially a interpreter that is just a little simpler than the python one (has fewer types for example). And yet, nobody talks about a java interpreter

You do not want Octoprint on a machine that is busy. Otherwise you have load spikes that cause Octoprint to not be able to send the move-commands (gcode) as fast as the printer executes the movements. This problem is pronounced with faster printers and slicers that break up arcs into small straight lines (which is practically all slicers). Otherwise your printer stutters because it has to take small breaks to wait for the next command from octoprint.

What privacy concerns do you have? I’m all for privacy, but I don’t really see where registrars are a delicate topic in that. The most that comes to mind is that some (most?) have a service where they do not give out your name and address for whois requests, but instead the details of the registrar (namecheap has that for example).

True words. The sustained effort to keep something in decent shape over years is not to be underestimated. Now when life changes and one is not able or willing anymore to invest that amount of time, ill-timed issues can become quite the burden. At one point I decided to cut down on that by doing a better founded setup, that does backup with easy rollback automatically, and updates semi-automatically. I rely on my server(s), and all from having this idea to having it decently implemented took me a number of months. Just because time for such activities is limited, and getting a complex and intertwined system like this reliably and fault tolerant automated and monitored is simply something else than spinning up a one off service

Since you run everything in docker, I guess you have experienced the benefits of containerization. So why not leverage that for your host too?

Fedora IoT is a container-based host that runs on your hardware, with a focus on edge device deployment.

https://fedoraproject.org/iot/ I have it running on two servers as well, and it works great. The only thing I changed is that I layered docker on it instead of using podman, because at the time I had trouble getting my reverse proxy working properly over ipv6

Not to me. Absence of QA allows faulty parts to make it into a plane, it does not explain why there are faults in the first place. For doors and wheels popping off there have to be either lethal part design mistakes, parts made from play doh instead of aluminium/steel, or the people on the assembly line throwing fasteners in the bin instead of putting them on. It’s not like a door pops of because its seal touched soap once and somebody poked an unverified piece of plastic at it. Especially in aviation, where you need to have redundancies.

How does this part (which is what the headline refers to and presumably the most outrageous inspection finding)

At one point during the examination, the air-safety agency observed mechanics at Spirit using a hotel key card to check a door seal […]. In another instance, the F.A.A. saw Spirit mechanics apply liquid Dawn soap to a door seal “as lubricant in the fit-up process,” according to the document. The door seal was then cleaned with a wet cheesecloth

have anything to do with the opening of the article

Just last week, a wheel came loose and smashed through a car, and earlier this year the door from a 737 Max aircraft broke off mid-flight

???

The article misses the whole point, which is that the audit did not uncover the sources of these incidents.

It is not a fork aiming to replace it. It is rather a spin with saner defaults to cater to companies as customers. The product which shall carry ondsel financially is their freecad compatible cloud offering, and the hope is to use that for elevating freecad itself too. They need their spin to be able to ship an ootb experience fitting their motive and brand. So if you would like a less confusing experience it might be something for you. Currently there’s a lot of borderline deprecated and also redundant functionality in freecad, so I hope that ondsel’s cleanup mantra will make it to the ootp upstream experience as well.

As far as I remember ondsel is working on upstreaming realthunder’s approach to freecad, but it is a lot of work to polish up because it touches so many parts of the application.

Here is a nice interview with one cofounder of ondsel where I have this information from: https://shows.acast.com/ohm-podcast/episodes/ep-12-brad-cto-of-ondsel

Weil hier auch Wacker Chemie steht: die Transformation in der Chemieindustrie ist nicht das als was sie sich verkauft. Dazu gabs vor zwei Wochen einen Vortrag am Chaos Communication Congress https://m.youtube.com/watch?v=us2ps12oXZc&

Ah interessant, vielen Dank!

Was ist 2017 passiert?

Just recently I listened to a very interesting interview of Brad Collette, the founder of ondsel. You can find it here https://open.spotify.com/episode/2TwCcFWC8VwQ4ctjBTZ0Xd?si=pNjFQOI0RCe0v1MU47mwpg

and here https://shows.acast.com/ohm-podcast/episodes/ep-12-brad-cto-of-ondsel

Not doing that is the whole point of flatpak. XDG_HOME is a bad design because it leads to a giant and hard to sift through swamp of mixed files, with no separation in terms of tidyness and security whatsoever.

The second statement is not true, the standardization is flatpak portals and they by now cover almost every aspect of the system. The screenshot api is this: https://docs.flatpak.org/en/latest/portal-api-reference.html#gdbus-org.freedesktop.portal.Screenshot